Angle Finder and Digital Inclinometer
The inclinometer will display angles down to 0.1 degree resolution. With a zeroing function it is possible to compare an angle or surface relative to another. Particularly useful for precession alignment of machinery such as bench saws, drop saws and drill presses.
The unit will provide readings of +/-180 Degrees (0-360 Degrees).
The bottom of the unit has built in disk magnets which is strong enough to carry the units weight and will allow the unit to securely stick to metallic surfaces for accurate measurements.
Drainage angles and run-off slopes
Tool setting on Lathes
Setting blade angle of Circular Saws
Setting blade angle of Mitre Saws
Setting work piece angle for milling
Grader and tractor work alignment
Check drill press table setting, table saw, jointer table, band saw, jointer fence or band saw table
Range: +/- 180 Degrees
Resolution: 0.1 Degrees
Accuracy: +/- 0.1 Degrees
Working Current: < 100 uA
Power: 2 x AAA battery (Not Included)
Dimension: 50 (L) x 50 (W) x 33 (D) mm