CTEK MXT 14 - 24v 14a 8 Stage Industrial Lead Acid Battery Charger
The MXT 14 is an industrial 24v charging system designed for the profession. CTEK's MXT14 is developed for commercial vehicles where the batteries are constantly put under considerable strain. Ideal for busses, trucks, fleet and CVB workshops. The MXS 14 offers many features and functions for the professional industry. Including battery diagnosis that shows if a battery can receive and retain charge, a special reconditioning function that restores deeply discharged batteries as well as a unique maintenance and temperature sensor that optimises the charge cycle to match weather conditions.
The MXT14 model is equipped with CTEK's power supply mode which allows for batteries to be disconnect from vehicle, while retaining important electronic configuration that would otherwise need to be reset.
The MXT 14 is a fully automatic 8-step charger that delivers 14a to 24V batteries from 28–300Ah and is suitable for maintenance charging up to 500Ah. The charger is IP44 classified (outdoor use), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof.
Charger is supplied with clamps, temp sensor on cable.
Rated Voltage: 220-240v AC, 50–60Hz
Charging voltage Normal: 28.8v
Charging Voltage Recondition: 31.6v
Charging Voltage Supply Mode: 27.2v
Min Battery Voltage: 2.0v
Charging Current: 14a max
Back current Drain: <1Ah/month
Ambient Temperature: -20 to +50 degrees celcius (output power is reduced automatically at high temperatures)
Charger Type: 8 step, fully automatic charging cycle
Battery Types: All types of 24V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)
Battery Capacity: 28-300Ahr up to 500Ahr for maintenance
Dimensions: 235 x 130 x 65mm
Insulation Class: IP44
|Model #||MXT 14|
CTEK offers 2 year manufacturer warranty on this product. Warranty will be void if:
Charger has been used with much higher current and or voltage than designed for and specified in models specifications sheet.
Clear signs of heat on any of the CTEK casing, cables or circuitry.
Used with incorrect voltage or incorrect battery types.
Visible signs of impact or water damage.
CTEK product has been opened by a non CTEK authorised engineer or agent.