Water Resistant PWM Solar Charge Controller 12v 8a
Compatible with both sealed lead acid as well as conventional wet (flooded) lead acid batteries. This water resistant solar controller adopts pulse width modulation (PWM) for optimal 3 stage battery charging. Compatible with all types of solar arrays and potted in epoxy resin for maxim water resistance and ideal for areas of high humidity.
This controller also features night light load output, which will automatically connect the load during the evening and disconnect during daytime. With added low voltage connect and disconnect circuitry.
There is no need for an additional separate blocking diode as this controller will automatic block reverse flowing current from the battery. Traditionally occurring in the evening or very low light conditions where the panel is not producing enough power for the battery.
Max PV Open Circuit Voltage: 26v DC
Max PV Short Circuit Current: 10a
Battery Voltage: 12v DC
Rated PV Input Current: 8a (10aA max)
Load Voltage: 12v DC
Rated Load Current: 8 amps (10a max)
SLA Charging Voltage: 14.5v DC
Wet Cell Charging Voltage: 14.8v DC
Float Voltage: 13.8v DC
Standby Current Consumption: 7mA
Dimensions: 97mm (L) x 46mm (W) x 26mm (H)