iCharger 106B+ Balance Charger
iCharger 106B is our entry level battery charger and conditioner. Outputting 10amp and 250 (true) watts. Charging 1-6 cell lithium batteries (lip, Life etc), 1-17 cell NiMh and NiCD and 2-24v Lead Acid Batteries.
Features At A Glance:
Built In Resistance Meter: determines which battery pack is the best, on its last legs etc.
PC USB Connectivity: Works with PC to plot discharge & charge curves. This allows very accurate analysis of battery power, voltage, condition and more.
Firmware Upgradable: All iChargers are firmware upgradable.
Far Better Accuracy: No more frustration with your charger giving you one reading and your battery pack doing something else.
On The Fly Parameter Settings: Change charge current, end voltage and safety cut-offs during a cycle. No more stopping and starting a cycle to make changes.
10 Memories: Store ALL settings for a battery. Memories can carry long names.
Monitor Function: Monitoring your batteries (from balance port) while in use or during its application. Useful to analyse the true power of the battery, running time, discharge graphs and much more!
Efficiency: iChargers have been proven to have 90% efficiency. Greater efficiency means more power for charging and no need for large heatsinks.
Noise: Built in fan only comes on when absolutely necessary and based on user set internal temperature settings.
Size: Smallest sized DC battery charger in comparison to its power rating.
Faster Charge Time: The more power (watts) a charger has, the more power it can supply to the battery. This charges the battery faster, also allowing for advanced charging techniques, such as parallel charging.
All iChargers are DC powered chargers. For best options on powering the iCharger, please check our Bench Top Power Supplies.
Input Voltage: 10-18 Volts DC
Charge Current Range: 0.05 – 10.0 Amps
Discharge Current Range: 0.05 – 7.0 Amps
Maximum Charge Power Capacity: 250 watt at input voltage greater than 13.5 volt
Balance Accuracy: <10mv
Lithium (LiPo/Lilo/Life) battery cell count: 1-6 series
NiMh/NiCD Battery Cell Count: 1-17 Series
Pb (Lead Acid) Cell Count: 1-12 series (2-24v)
Battery Setup Memories: 10
1 x iCharger 106B
1 x USB Cable (Specific to iChargers)
2 x 4mm Banana Socket to Alligator Clip Adaptors (Red and Black)
1 x 4mm Banana Plug to Alligator Clips Charge Cable
1 x iCharger Temperature Sensor
1 x Mini CD ROM
Product brochure / datasheet can be downloaded by clicking the PDF icon just below the main image.
All our iCharger products carry a 12 Month Manufacturer Warranty. The warranty is void if damage is due to:
- Excessive heat from incorrect use or higher input voltage than designed for and clearly specified.
- Using the product incorrectly with incorrect battery products or power supplies.
- iCharger aluminium case opened by non iCharger recommended technician.