This iCharger multi chemistry battery charger combo consists of iChargers most popular 106B+ charger and iCharger P350 350w AC Power Supply.
The power supply and charger combination will provide up to 10 amps true output power from AC power or when out in the field. This is plenty of power for charging lipo batteries up to 6 cell, as well as other battery types such as NiMH, NiCD and conventional lead acid batteries with a charge current of up to 10 amps.
iCharger's P350 power supply has enough power to run the 106B+ at full power, leaving plenty of head room to also run another smaller RC charger from the same power supply at the same time. This combo package is an excellent all round charging solution!
iCharger 106B Specifications:
Input Voltage: 10-18 Volts DC
Charge Current Range: 0.05 – 10.0 Amps
Discharge Current Range: 0.05 – 7.0 Amps
Maximum Charge Power Capacity: 250 watt at input voltage greater than 13.5 volt
Balance Accuracy: <10mv
Lithium (LiPo/Lilo/Life) battery cell count: 1-6 series
NiMh/NiCD Battery Cell Count: 1-17 Series
Pb (Lead Acid) Cell Count: 1-12 series (2-24v)
Battery Setup Memories: 10
iCharger P350 350w Power Supply Specifications:
Input Voltage Range: 100-240VAC
Output Voltage Range: 14.9-15.5VDC
Input Frequency: 50/60Hz
Output Current: 0-23A
Power Efficiency: 88%
Operating Temperature: 10-40 Degrees
Safety Standards: EN60950-1
EMC Standards: EN55022, EN61000-3-2, EN61000-3-3, EN55024
Cooling Method: Forced Air Cooling By Built-In DC Fan
Dimension (L * W * H): 185 x 88 x 47mm