12-48v 50a Lead Acid and LiFePO4 MPPT LCD Solar Charge Controller
Finally a consumer grade MPPT solar charge controller that is compatible with traditional Lead Acid batteries as well as modern LiFePO4 batteries!
Adopting Maximum Point Tracking (MPPT) for maximum efficiency and best use of available power. This model is suitable for 12v, 24v, 36v or 48v lead acid batteries (AGM, Gel and Flooded) as well as (only) 12v LiFePO4 batteries.
This model can scale up to 12v 700w or 24v 1500w. We recommend batteries with a capacity of 50ahr or more.
This unit features three timer programs, three charging stages and an LCD status display that shows real time condition of battery, load voltage, PV voltage, time and much more. The package includes an external temperature probe that will adjust float voltage for lead acid batteries depending on ambient temperature.
The integrated Wi-Fi enables you to remotely access the controller using an app on your Smartphone to keep an eye on the system, and two USB ports are provided to charge your USB gadgets. The fan less design is built into a durable case for permanent installation with heavy-duty screw terminals for cabling up to 6AWG. Over-voltage, low-voltage protection, reverse connection, short-circuit, over-current, and over-temperature protection included.
Intelligent and optimum MPPT charging algorithm
Backlit LCD with real-time energy stats, operational and fault message
Temperature sensor for battery charging compensation
Low voltage disconnect/reconnect
3 stage charging
3 programmable timers
Backlit LCD screen
2 x USB Ports
LiFePO4 and Lead Acid battery compatibility
Nominal System Voltage: 12/24/36/48V DC
Rated Current 12/24V System: 50A
Rated Current 36V System: 35A
Rated Current 48V System:25A
Max Input Power: 700W/12V, 1400W/24V
Lead Acid Constant Voltage Charging Voltage: 14.4V/28.8V/43.2V/57.6V
Lithium Constant Voltage Charging Voltage: 14.5V
AGM Constant Voltage Charging Voltage: 14.6V/29.2V/43.8V/58.4V
Minimum Battery Capacity: 50Ah+
Typical Idle Consumption: 160mA max.
Load Recover Voltage: 12-13V/24-26V/36-39V/48-52V
Max DC current Rating: 50.0A
IP Rating: IP30
Operating Temperature: -10-40.0 Degrees Celsius
Input Type: Screw Terminal
Input Connection: Terminal
Output Type: Screw Terminal
Output Connection: Terminal
Number of Ports: 2.0pc
Max PV Open Circuit Voltage: 135.0V
Max Charging Current: 50.0A
Max Load Current: 50.0A
Max Solar Panel Array: 700.0W-1500W