The Fluke 62 MAX and 62 MAX+ infrared thermometers are everything you'd expect from the experts in measuring temperature in transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents in hard to reach areas for repair and maintenance. Small in size, extremely accurate and yet easy to use . IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop.
Measure -30 to 500 Degrees Celsius
Extremely accurate: up to + 1.0 Degrees Celsius or + 1.0% of reaching
IP54 rating for water resistance and dust proof allow you to work rain or shine and even in the most dirty or dusty industrial sites.
Strong enough to withstand a 3m drop. No worry even if you work from a ladder.
Small and lightweight; clips to your tool belt or belt loop or easily fits into your tool box.
Precise laser technology makes for more accurate and repeatable measurements.
Large, backlit display: Large screen makes data easier to read, even in dark areas.
Min/Max/Avg/Dif: Displays the minimum, maximum or average temperature, or the difference between two measurements.
Alarm: Hi and Lo alarms for rapid display of measurements outside the limits.
Power by a single standard AA battery.
Temperature Range -30 to 500 Degrees Celsius
Accuracy: +/- 1.5 Degrees Celsius or +/- 1.5% of reading, whichever is greater
Response Time (95%): < 500 ms (95% of reading)
Spectral Response: 8 to 14 microns
Emissivity: 0.10 to 1.00
Optical Resolution 10:1 (calculated at 90% energy)
Display Resolution: 0.1 Degrees Celsius
Repeatability Of Readings: +/- 0.8% of reading or < +/- 1.0 Degrees Celsius, whichever is greater
Power By: 1 x AA battery
Battery Life: 10 hours with laser and backlight on
Dimensions: 175mm x 85mm x 75mm
Operating Temperature: 0 to 50 Degrees Celsius
Storage Temperature: -20 to 60 Degrees Celsius
Operating Humidity: 10% to 90% RH non-condensing at 30 Degrees Celsius
Operating Altitude: 2000 meters above mean sea level
Storage Altitude: 12,000 meters above mean sea level
IP Rating: IP 54 per IEC 60529
Drop Test: 3 meters
Vibration and Shock: IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms
EMC: EN 61326-1:2006 EN 61326-2:2006
Standards and Agency Approval: Compliance EN/IEC 61010-1: 2001, Laser safety FDA and EN 60825-1 Class II
Product brochure / datasheet can be downloaded by clicking the PDF icon just below the main image.
|Model #||62 MAX|